ServicesEntry Doors
Entry Door Installation in East Tawakoni
Your new front or side door arrives as a complete unit: slab, square frame, sloped sill pan and tempered glass anywhere code requires it. We set it into solid framing so it closes with an easy click, keeps weather out and is ready for any inspection that applies.

A new door is only as good as the opening around it
Most entry door trouble starts in the frame, not the door itself. Jambs rot at the bottom, the sill lets water creep under the floor, and the opening drifts out of square. A new slab hung in a tired frame will start sticking again within a season, so we usually replace the whole prehung unit and rebuild what sits behind it.
We work in fiberglass, steel and wood. Each one feels and wears differently. Fiberglass holds its finish and shrugs off humidity. Steel is firm and secure but dents. Wood is warm and handsome, and it asks for more care in a hot summer sun. We show you samples in person and tell you plainly which suits your home and how much upkeep each needs.
Our team has over 10 years of experience setting doors, and much of that work is the part you never see once the trim goes back on: shims, flashing and fasteners driven into solid framing.
What an entry door installation covers
- Removing the old unit
- The existing door and frame come out with as little disturbance to the surrounding wall as we can manage. Interior casing that is still in good condition is pried off gently so it can go back up.
- Opening inspection and repair
- With the old frame gone, we look over the rough opening, the subfloor under the threshold and the studs on either side. Any soft wood gets photographed, and we explain the fix and get your go-ahead first.
- Threshold drainage and flashing
- A sill pan goes in beneath the new threshold with a slight outward slope, and flashing tape is lapped up the sides starting at the bottom so each layer sheds onto the one below it. Water that gets past the weatherstrip finds its way back outside instead of into the floor.
- Code-compliant glazing and hardware
- Glass in a door or a nearby sidelite must be tempered safety glass, and we order it that way. The opening keeps its full width for exit, and the lockset and deadbolt are set into a reinforced strike.
- Fit, finish and cleanup
- We tune the hinges until the door swings evenly and latches without a push, then seal the exterior, reinstall the trim and haul off the old unit along with every scrap.
Signs your entry door is ready to be replaced
Gaps you can see or feel
Stand inside with the door shut on a bright afternoon. A thin line of sunlight along the jamb, or a breeze on your hand, tells you the seal is gone, and your air conditioning is working harder because of it.
Sticking, rubbing or a lock that fights you
Shifting clay soil moves houses across this part of Texas, and doors show it first. When the deadbolt only throws if you lift the handle, the opening has gone out of square.
Soft wood at the bottom of the jamb
Push the tip of a screwdriver into the lower few inches of the frame. When the wood gives way under light pressure, moisture has been slipping in under the threshold, and the subfloor beneath it could be the next thing to go.
Fogged or cracked glass
A cloudy panel means a failed seal. Cracked glass in a door that is not tempered is a safety problem worth fixing soon.
Swollen, warped or peeling slab
Older wood and early steel doors can bow or rust through their skins. Refinishing rarely brings them back.
What decides the price of an entry door
Every quote is based on your real opening, so we explain each piece rather than guess a number over the phone. The biggest swings come from the door you choose and the shape the framing is in after the old unit is removed. To spread out payments, ask about $0 down on the whole project or our 0% financing options when you call.
Material and grade
Steel, fiberglass and wood are each priced differently, and the better grades of each come with thicker skins, denser cores and stronger frames.
Glass, sidelites and transoms
A plain solid slab costs less than one with decorative glass. A sidelite or transom adds to the price, and code calls for tempered glass in every pane placed there.
Dimensions and layout
Standard sizes are the least expensive. Taller doors, wider openings or a double door that requires reframing the rough opening take more materials and labor.
Damage uncovered at removal
Rotten framing or subfloor at the threshold calls for extra lumber and time. We photograph what turns up and review it with you before doing that repair.
Hardware and finish
Smart locks, multipoint latches and factory paint or stain all affect the final total.
The steps of your door project
- 1
Free in-person consultation
We visit, measure the opening, check the frame and threshold, and go over styles, glass and finish with you. You receive a written quote that explains every line.
- 2
Permit review and ordering
We find out what the city requires for your door and take care of any permit. Then we order a unit built to your exact measurements, which typically takes a few weeks.
- 3
Installation day
A single entry door is usually installed in one day. We cover the floors inside and have your home secured by nightfall, with no open opening left behind.
- 4
Walkthrough and inspection
We go over the locks, the adjustment points and finish care with you. When an inspection applies, we set it up and see it through until it passes.

Entry door questions we hear often
Do I need a permit to replace my front door?
It depends on the city and the scope of the work. A same-size swap often needs none, while widening the opening or changing structure usually does. We check the requirements before ordering and pull the permit when one is needed, so that piece is off your plate.
Which material holds up best in our summers?
Fiberglass is usually the easiest to live with, since it does not swell, rust or dent. Steel is good value on a door shaded by a porch. Wood is beautiful but wants regular refinishing, especially on a west-facing door.
Can you install a door with glass in it safely?
Yes. Code calls for tempered safety glass in doors and in sidelites close to them, and every glazed unit we order is built that way. Low-E coatings are also available to cut down on heat gain.
Will my home be open to the weather during the job?
Only for the hours the opening is being prepared. We plan the day so the new door is set and locking before we leave, and we cover floors and nearby furniture while we work.
How will I know the hidden work was done properly?
You will see it. Before the trim goes back on, we photograph the opening so you can look at the flashing, the shims and any framing repairs that end up behind the casing. We also walk you through the door itself, from the latch to the weatherstrip, before we call the job finished.

Talk through your new door with us
We will come out, measure, show you material samples and give you a written quote. If your windows are also due, we can look at window replacement or a storm door during the same visit.